More info

Saving Hot Water: Where Showers and Boilers Use Energy

How much energy hot water uses in a household, how much water different shower heads deliver and where tenants can start without renovation. With an example.
Zwei Studentinnen auf dem Campus im Herbst

Contents

Saving hot water is a topic that is often underestimated. If you shower daily, use a boiler or supply several people in a shared flat, you spend energy heating water that first has to be warmed. This guide shows where that energy goes and which levers tenants have without any building work.

Short answer: According to the German Environment Agency (Umweltbundesamt), hot water accounts for about twelve percent of the total energy consumption of private households. The agency gives 12 to 15 litres per minute for conventional shower heads and 6 to 9 litres per minute for water-saving ones. The underlying figures date from 2008 to 2013. Last updated: November 2026.

The most important points at a glance

  • Hot water is a major energy item in the household, about twelve percent of private energy use according to the Environment Agency (data basis 2013).
  • The shower head is the quickest lever, because a water-saving model delivers noticeably less water per minute.
  • With electric heating, the agency reports that a considerable share of the electricity use of a two-person household goes to hot water.
  • Most figures on the source page date from 2008 to 2013 and should be read as orientation.
  • A sum in euros can only be calculated with your current prices and your consumption.

How much energy is in hot water?

Hot water needs energy because water has to be heated from the supply temperature to the temperature you want. Whether through an instantaneous water heater or a storage boiler, the heat comes from gas, district heating or electricity. The Environment Agency puts the share of private households in Germany at about twelve percent of their energy consumption, based on data from 2013.

With electric heating, the same page reports that around 25 percent of the total electricity use of an average two-person household goes to this purpose. The data basis is old, however. The figures rely on studies from 2013 and earlier surveys, so they do not replace a current bill.

Which levers bring the most?

The table below summarises the figures the Environment Agency gives on its page. Each row carries the date of its own source, because the values are not all of the same age.

MeasureFigure given by the sourceDate of the figure
Water-saving shower head instead of a conventional one6 to 9 instead of 12 to 15 litres per minuteSources from 2008 to 2013
Water-saving shower head in a two-person householdabout 20,000 litres of water per year (Öko-Institut)Source from 2012
Retrofit device for an under-sink storage boiler with 5 to 15 litresabout 135 kWh per yearSource from 2008

How do I calculate one shower?

The shower head determines the water use per minute, and the shower duration determines the rest. The following example shows the water volume, not the energy costs. Energy also depends on the temperature and on the equipment.

Assumption: You shower for 7 minutes. With a conventional head delivering 13.5 litres per minute (the middle of the 12 to 15 range), about 94.5 litres flow. With a water-saving head delivering 7.5 litres per minute (the middle of the 6 to 9 range), it is 52.5 litres. That is 42 litres less per shower.

If you shower every day, multiply this difference by the number of showers in a month. You can only assess the energy part once you know the hot water price of your supplier or the billing from your property management.

What can tenants do without building work?

Many measures need neither a tradesperson nor consent if they can be reversed. The steps below are the simplest starting points, ordered by effort.

  • Replace the shower head with a water-saving model. Many versions can be fitted with a few simple steps.
  • Shorten your shower gradually and time yourself to see how long you really need.
  • Do not set the mixer hotter than you need, because every degree of heating costs energy.
  • With a boiler, clarify who is responsible for settings and maintenance before you change anything.
  • Ask your landlord whether a retrofit device or a new storage unit makes sense.

What do showers and boilers really cost?

A reliable sum in euros can only be built with current figures. The source page does mention savings in euros, but these come from 2012 and rely on the energy prices of that time. For your own calculation you need the price per kilowatt hour or cubic metre from your bill and your consumption over the last months.

Who may change the boiler or the shower head?

In a rented flat the boiler is usually owned by the landlord. A water-saving shower head is often easier to swap than a storage unit. Still, check the tenancy agreement if it contains rules on fittings, and keep the old head so that you can refit it when you move out.

Frequently asked questions

Is a water-saving shower head worth it for students?

That depends on how often you shower and on how your hot water is billed. The effort of a swap is small, and the effect is noticeable if you shower often. Whether it pays off financially only becomes clear when you calculate it with your tariff and consumption.

Is an under-sink storage boiler more efficient than an instantaneous heater?

The sources do not answer this question in general terms. The Environment Agency page names a retrofit device for under-sink storage boilers of 5 to 15 litres, which according to a source from 2008 should save about 135 kWh per year. Whether a change suits your flat is best decided by a specialist firm based on the equipment present.

How should I set the boiler?

The temperature should be as high as hygiene requires and no higher. This guide does not give a fixed figure, because the device type and the rules of the property management differ. If you are unsure, ask your landlord or the installer.

Does a water-saving head help less if I shower for a long time?

The saving per minute stays the same, but the total volume grows with the duration. Shower head and shower time therefore work together. Combining both lowers consumption most clearly.

Which figures are current?

Most figures on the Environment Agency page date from 2008 to 2013. For current values, look at the consumption information from your supplier or property management.

How to proceed now

  1. Time your showers over three to five days.
  2. Check which shower head is installed and compare the litres per minute stated on it.
  3. Read your last bill for hot water or heating and note the price per unit.
  4. Agree with your landlord on a swap of the shower head before you order a new one.

Related guides

Sources: German Environment Agency, page on hot water and energy use (data basis 2008 to 2013).

Last updated: November 2026. This guide is general information, not individual advice.

Teilen

Weitere Artikel

Student vergleicht am Schreibtisch zwei Versichertenkarten

Gatekeeper model over 30: what it means for costs and fund choice

Student vergleicht am Schreibtisch zwei Versichertenkarten

Requesting a contribution certificate from your health insurer

Student vergleicht am Schreibtisch zwei Versichertenkarten

Fund merger or closure: what happens to contribution and membership