A balcony solar system on the balcony of a condominium raises a different question than in a rented flat. Here the landlord does not decide, the owners’ community does. Since the reform of the German Condominium Act (Wohnungseigentumsgesetz, WEG), the law names plug-in solar devices explicitly. This guide explains which entitlement you have, which limits apply and how the route to a resolution works.
Kurz beantwortet: Under Section 20 para. 2 no. 5 WEG, every condominium owner may demand appropriate structural changes that serve electricity generation through plug-in solar devices (version as amended by Federal Law Gazette I no. 306 from 2024, last updated November 2026). The implementation must be decided in line with proper administration. An entitlement to carry out the work without a resolution therefore does not exist.
The most important points in brief
- The entitlement expressly covers plug-in solar devices, meaning balcony systems that feed into a socket.
- The entitlement concerns an appropriate structural change, not automatic consent without review.
- The owners’ meeting decides on implementation in line with proper administration.
- Common property, appearance and safety of the system are typical points of review.
- Registration in the Core Market Master Data Register remains a separate step, independent of the WEG.
What the entitlement under Section 20 WEG covers
The provision belongs to the rules on structural changes. According to its wording, every owner may demand appropriate changes that serve, among other purposes, electricity generation through plug-in solar devices. The legislator has thus included plug-in solar devices in the list of purposes for which an owner can push a project through.
The word appropriate is the decisive term. The provision does not say that any system may hang anywhere. It requires a weighing that takes into account the interests of the other owners and the design of the building. That is why the route through a resolution matters so much.
The route to a resolution
The entitlement does not lead directly to installation. Under Section 20 para. 2 sentence 2 WEG, the implementation must be resolved in line with proper administration. In practice, you bring the project to the owners’ meeting or file a motion. The community then votes on whether, and under which conditions, the system is permitted.
| Step | What happens | What to watch |
|---|---|---|
| Specify the project | Model, output, mounting location and fixing are set out | Prepare technical details in writing |
| File the motion | The project is placed on the agenda | Observe the notice period and form under the declaration of division |
| Adopt the resolution | The owners’ meeting decides on implementation | Record conditions such as mounting method and who bears costs |
| Implementation | Installation after the resolution | Keep the resolution and register the system |
Whether a resolution comes faster when the motion is well prepared cannot be guaranteed. A clear description of the system and its mounting nevertheless helps at every meeting.
Which limits apply?
The limits follow from the law and from the community’s rules. The entitlement is subject to the test of appropriateness. The community can therefore set conditions, for example on fixing to the façade, on appearance or on the position of the modules. Whether a solution is appropriate depends on the individual case.
Rules of the declaration of division and of any house rules also need checking. They can set out which changes to common property or to the façade are permitted. A resolution does not replace that review.
Which costs arise?
The costs of purchase and mounting are generally borne by the owner who wants the system. The resolution may, however, contain conditions, for example on liability for damage or on removal when a unit is sold. Have these points recorded in the resolution so that the question does not arise later.
Assumption for an example: a system costs 500 euros once. That sum is borne by the owner, unless the resolution provides otherwise. Whether and how electricity costs fall depends on yield and consumption, which this guide does not quantify.
What to prepare for the motion
A motion is more likely to be accepted when it covers the points other owners ask about. These include the type of module, the output in watts, the planned mounting location and the fixing. A photo of the spot and a sketch of the mounting help with the discussion. If the inverter is inside the flat, that belongs in the description as well.
Safety matters just as much. Information about the socket, the protection and the use of an approved device shows that the system is properly planned. Attaching the manufacturer’s documents avoids follow-up questions at the meeting.
What neighbours and the community should know
A balcony system often affects neighbours too, for example through visible modules or its position on a shared façade. A short note in advance builds trust and reduces resistance at the meeting. The community decides on implementation, not on your personal interest. The reasoning should therefore remain factual and refer to mounting, safety and appearance.
The administrator also plays a role. The administrator organises the meeting and sets the agenda on the basis of the motion. If a project is missing from the agenda, it can be taken up at the next meeting. Early coordination with the administrator saves time.
How to deal with a rejection?
A community must reach its decision in line with proper administration. Anyone who is refused should ask for factual reasons, such as concrete safety concerns or a binding façade design. A bare reference to appearance alone is more often questioned. Have the reasons recorded in the minutes so that you can later see what the decision rests on.
If a resolution is disputed, a legal review can make sense. That question goes beyond a general guide and depends on the individual case. A lawyer specialising in condominium law can assess the declaration of division and the minutes together.
Frequently asked questions
Can the community simply forbid the balcony system?
A blanket ban is hard to reconcile with the entitlement under Section 20 para. 2 no. 5 WEG, because the law names plug-in solar devices expressly. The community can still decide on execution, fixing and appearance. Anyone who votes against should have the reason recorded in writing.
Does this also apply in a rented flat?
No. Tenants follow different rules, because the landlord decides and the WEG does not apply. More on that is in the guide on balcony systems in a rented flat, listed below.
Do I have to register the system?
Registration in the Core Market Master Data Register is a separate step, regardless of whether the community has agreed. The guide on registering a balcony system describes which details are needed.
What happens if I move out?
That depends on the resolution. If the community sets conditions such as a duty to dismantle, the resolution should say whether these bind a successor. A clearly drafted resolution avoids later disputes.
What to do now
- Check the declaration of division and the house rules for rules on façades and balconies.
- Prepare a written description of the project with model, output and mounting method.
- File the motion in time for the next owners’ meeting.
- Have the resolution recorded with all conditions and register the system afterwards.
Related guides
- Climate, Energy and Costs 2027: The overview for tenants and students
- Balcony system in a rented flat: can the landlord refuse?
- Registering a balcony system
- Grid fees 2027
Sources: Section 20 WEG, wording with version note, dejure.org, retrieved November 2026
Last updated: November 2026. This guide is general information, not individual advice.